plasticphotovoltaics@youtube plasticphotovoltaics@facebook plasticphotovoltaics@twitter

Requirements for CLOP samples

  1. The width and length of the sample must not exceed 25 cm.
  2. The width and length of the active area of the device can be minimum of 0.5 cm and maximum of 20 cm.
  3. The initial photoconversion efficiency of the device should be 1 % as minimum.
  4. The expected lifetime of the device under room conditions should be at least one week.



Current weather

Temperature: 14.11 °C
Sample temp: 11.60 °C
Irradiance: -3.3 W/m²
Humidity: 91.60 %Rh
Last update: Sat, 19 Aug 2017 23:42:03 +0200 - details
Copyright DTU Energy
Sitemap | Contact us | Press center